P-110 Block Frame (Ladder Type)
- Description
- Technical sheet
- LEED sheet
Designed to be inserted into the mortar joint of walls made of concrete blocks. This frame is made for blocks from 4 to 12 inches wide and in three types of resistance. Standard and Super heavy duty.
COMPLIANCE
Tensile Strength - 80,000 PSI
Breaking Limit – 70,000 PSI
Compliance with standards: ASTM C951, ACI 530, CSA A370
DESCRIPTION
Reinforcement for installation in the mortar joint of concrete block walls.
CALIBER
– Standard (STD): 9 ga (3.6 mm) side / 9 ga. (3.6mm) middle
– Super heavy duty (SHD): 4.76 mm side / 3/16 (4.76 mm) middle
MATERIAL
– Carbon Steel, Mill. galvanized (ASTM A82), (ASTM A641)
– Carbon steel, hot-dip galv. after fabrication (ASTM A82), (ASTM A153)
LENGTH
10 feet
COMPLIANCE
Tensile Strength - 80,000 PSI
Breaking Limit – 70,000 PSI
Compliance with standards: ASTM C951, ACI 530, CSA A370
DESCRIPTION
Reinforcement for installation in the mortar joint of concrete block walls.
CALIBER
– Standard (STD): 9 ga (3.6 mm) side / 9 ga. (3.6mm) middle
– Super heavy duty (SHD): 4.76 mm side / 3/16 (4.76 mm) middle
MATERIAL
– Carbon Steel, Mill. galvanized (ASTM A82), (ASTM A641)
– Carbon steel, hot-dip galv. after fabrication (ASTM A82), (ASTM A153)
LENGTH
10 feet
On request, please contact us.
Need a hand?
You can contact us now to place your order:
by phone: 450-443-6535
or by email: commande@senneco.com
Open Monday to Friday 6:30 a.m. to 5 p.m.
Access to video training
Wide choice of references
Fast shipping in Quebec
Experts at your service
Where to find us?
Our pick up point
To benefit from our pick-up service, you can place an order:
by phone: 450-443-6535
or by email: commande@senneco.com
We are located at 3400, boul. Losch, office 23 in Saint-Hubert.
Schedule
Monday 6:30 a.m. to 5:00 p.m
Tuesday 6:30 a.m. to 5:00 p.m
Wednesday 6:30 a.m. to 5:00 p.m
Thursday 6:30 a.m. to 5:00 p.m
Friday 6:30 a.m. to 5:00 p.m
Not from the area?
Check out our extensive network of distributors in Quebec and Ontario.